Detailed description
A patch quote that looks cheap is usually a quote for a different attachment. Heat transfer, sew-on and adhesive backing are three different products built from the same artwork, and only one of them suits the garment in front of you.
Where it is used
It is used where the logo has to survive industrial laundering rather than a home wash. That is a different specification: a higher melt point on the adhesive, a tighter edge on the cut, and a backing that does not delaminate after forty cycles at 60 degrees.
The material question
The material is TPU film, which is what makes a thin, soft, high-frequency welded label possible. It bonds at low temperature, so it suits heat-sensitive fabrics where a PVC or rubber patch would mark the surface.
How it is quoted
Quotations separate the one-off tooling from the piece price, because they behave differently. Tooling is paid once and kept on file against your artwork; the piece price falls with quantity and with how many designs share one sheet.
What ships with the goods
Each carton is marked with the design reference, size, quantity and lot, and the artwork reference is repeated on the packing list so a mixed shipment can be checked without opening every carton.
Checking it on arrival
Measure the size on the finished piece, not on the artwork. Moulded pieces shrink and embroidered pieces pull in, and a five percent difference is visible on a cap front.
If this is a repeat order, send the previous artwork reference and we will quote against the tooling already on file.