Detailed description
Three decisions fix the price of this item: the material, the attachment method and the artwork. Change any one and the tooling, the minimum and the lead time all move with it.
Where it is used
It is used where the logo has to survive industrial laundering rather than a home wash. That is a different specification: a higher melt point on the adhesive, a tighter edge on the cut, and a backing that does not delaminate after forty cycles at 60 degrees.
The material question
The material is TPU film, which is what makes a thin, soft, high-frequency welded label possible. It bonds at low temperature, so it suits heat-sensitive fabrics where a PVC or rubber patch would mark the surface.
How it is quoted
Sampling takes seven days from approved artwork, and the sample is produced with the production tooling rather than by hand, so what you approve is what the run produces. Bulk runs fifteen to twenty-five days after approval.
What ships with the goods
Packing is polybag plus export carton, with designs bagged separately inside the carton. That is what keeps a six-design order from arriving as one mixed bag.
Checking it on arrival
Press one piece onto the actual fabric with your own settings before the run starts. The failure mode on transfers is almost always the press, not the film, and it is cheaper to find that on one piece than on five hundred.
If the attachment method is open, send a sample of the garment and we will tell you which of the three constructions will survive its wash cycle.
