Detailed description
This item is made from artwork to a tooling, so the first order carries a cost the repeat order does not. Understanding which part is tooling and which part is piece price is what makes the second quote comparable to the first.
Where it is used
It goes onto polyester sports fabric, cotton drill, nylon outerwear, canvas bags and caps. The one combination that fails most often is a heat transfer onto a coated or water-repellent fabric, because the coating releases before the adhesive cures.
The material question
The construction is embroidered, so the edge and the stitch density are the specification. A Merrowed edge holds a shape on a curved surface; a laser-cut edge sits flatter on fine fabric. Stitch count per centimetre decides both the look and the price.
How it is quoted
Minimum order is set by the sheet, not by the design: several small designs can share one run, which is how a club with six logos keeps the unit cost close to a single-logo order.
What ships with the goods
Wash-test results are reported per lot where the customer specifies a cycle count, and the test method is named on the report rather than described as 'washable'.
Checking it on arrival
Press one piece onto the actual fabric with your own settings before the run starts. The failure mode on transfers is almost always the press, not the film, and it is cheaper to find that on one piece than on five hundred.
Send the artwork, the fabric and the quantity and the quote comes back split into tooling and piece price so you can compare it against your current supplier line by line.